Abridged summary of comp.lang.tcl@googlegroups.com - 24 updates in 9 topics

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Abridged summary of comp.lang.tcl@googlegroups.com - 24 updates in 9 topics

comp.lang.tcl mailing list
INCULA-IBAMBINI PAOLO BARRAI TRUFFAELAVACASHMAFIOSO <[hidden email]>: Sep 28 11:53AM -0700

BLOGUEIRO ITALIANO CRIMINOSO PEDOFILO E ASSASSINO PAOLO BARRAI ( MILANO 28.6.1965) EXECUTE MUITO LAVAGEM A CASH MAFIOSO! Blogueiro criminoso, assassino, pedofilhomosessexual Paolo Pietro Barrai ( ...more
[hidden email]: Sep 28 10:05AM -0700

I have a TCL script which reads a CSV file containing temperature and humidity data, uses TWAPI to open an Excel file, write the data into a new sheet, create a plot of the data and then save it all. ...more
Jarek Lewandowski <[hidden email]>: Sep 28 11:41AM -0700

Probably you should try this:
 
set temp_book [file join C:/ Users Peter Documents CPAP CPAP_plots.xlsx]
...more
mango <[hidden email]>: Sep 27 08:40PM

Gerhard Reithofer wrote:
 
 
> And further: Any ideas to make this access possible?
 
> TIA,
> Gerhard
 
I usually use dmesg(1) to see which serial device was attached. For example, ...more
Robert Heller <[hidden email]>: Sep 27 04:14PM -0500


> TCL's "open" manpage: "Valid values for fileName to open a serial port
> are generally of the form /dev/ttyX, where X is a or b, but the name of
> any pseudo-file that maps to a serial port ...more
Gerhard Reithofer <[hidden email]>: Sep 28 12:19PM +0200

Thank you all for so much feedback.
 
I will anwser all replied in this thread only, so it'l getting an bit
long.

@Harald Oehlmann
 
> % set conn [open /dev/ttyACM0 {RDWR}]
...more
Robert Heller <[hidden email]>: Sep 28 06:34AM -0500

> Sep 28 10:59:42 mecano mtp-probe: bus: 2, device: 28 was not an MTP
> device
 
> Can't interprete the information :-(
 
It just says it is not a Serial Port device, nor is it a Line Printer ...more
Rich <[hidden email]>: Sep 28 03:45PM

> SUBSYSTEM=="tty",ATTRS{idVendor}=="23c1",MODE="0666"
> Same filemode (crw-rw-rw-) as in my example and same reaction, i.e. bad
> option "-mode".
 
This /dev/tty device is from vendor 23c1.
...more
Robert Heller <[hidden email]>: Sep 28 12:08PM -0500

> loaded for the specific hardware. It is likely that the two programs
> are making direct USB access to the hardware, not going through a
> kernel driver.
 
Right. That is what libusb is for. ...more
NAZIPEDOFILO ASSASSINO DI FALERONE E MACERATA <[hidden email]>: Sep 28 06:07AM -0700

IL PEDOFILO ASSASSINO PAOLO CARDENÀ DI FALERONE E MACERATA HA UN BLOG CRIMINALISSIMO: VINCITORI E VINTI! NOI SAREMO I VINCITORI, CHE METTEREMO LUI, I SUOI MEGA CRIMINI E SUE MEGA BALLE DA ...more
Ashok <[hidden email]>: Sep 23 10:54AM +0530

I'll follow up on email
/Ashok
 
...more
Rich <[hidden email]>: Sep 22 10:32PM

> applications) is de facto standard in Windows world and in Ubuntu.
> One can have the file explorer on the taskbar even when it's not
> running. I have never found that confusing.
...more
Rich <[hidden email]>: Sep 22 10:35PM

>> was used for a different purpose.
 
> I do not agree. [wm withdraw] removes the window from the taskbar as
> well. [wm iconify] should minimize the window.
 
Correct. "wm withdraw" and "wm ...more
Robert Heller <[hidden email]>: Sep 22 07:18PM -0500


> There were no "task bars" into which an application could "iconify" in
> these days. In the Unix world, if there were no running apps at all,
> the desktop background would be just the ...more
Rolf Ade <[hidden email]>: Sep 23 01:13AM +0200

>> tDOM repository at http://tdom.org for the complete list of changes.
>> [...]
 
> I'll download the released binaries and I'm curious about the JSON stuff.
 
Well, great, please give it a try ...more
Gerald Lester <[hidden email]>: Sep 22 12:54PM -0500

On 09/22/2017 12:08 PM, Jason Guto wrote:
 
> exit
> ---CODE---
 
> When ran - I get the following error at the 'puts $file_content' in first if statement. How can I access the 'file_content' from ...more
Gerald Lester <[hidden email]>: Sep 22 02:57PM -0500

On 09/22/2017 02:06 PM, Jason Guto wrote:
> ...
 
> My application works as I need it; however, I need to be able to call the saved '$file_content' in the second if statement, since I am performing ...more
Rich <[hidden email]>: Sep 22 08:36PM

> set out1 [glob *]
 
> set file_ext "*.ameta"
> set sort_out [lsort -dictionary $out1]
 
I added some line numbers below.
 
 
> When ran - I get the following error at the 'puts $file_content' in ...more
Gerald Lester <[hidden email]>: Sep 22 04:05PM -0500

On 09/22/2017 03:28 PM, Jason Guto wrote:
>> }
 
> Thank you again, I am currently working through this code, and trying to understand.
 
> However, let me ask you this - how would I save the ...more
Rich <[hidden email]>: Sep 22 10:54PM

> Thinking over what you are telling me and trying hard to understand.
> Programming is not easy ++laugh++.
 
Actually, programming itself is very easy.
 
Learning programming, that can be hard ...more
Rich <[hidden email]>: Sep 22 10:59PM

> 'file_content' but I need to check first if the '.meta' file exists
> first, and only if it does exits, perform the next step to only
> files.
 
Well, your description above is somewhat confusing ...more
Georgios Petasis <[hidden email]>: Sep 22 07:21PM +0300

Στις 22/9/2017 18:35, ο Gerald Lester έγραψε:
 
> Because [expr] has its own mini-language (as do regular expressions) and
> the [expr[ mini-language is an infix language and not a ...more
Gerald Lester <[hidden email]>: Sep 22 10:35AM -0500

On 09/22/2017 09:14 AM, Busirane wrote:
> I use min and max infrequently enough that, when I do, I always trip over the differing syntax of the expr and mathfunc versions. Why does [expr min()] want ...more
Rich <[hidden email]>: Sep 22 08:26PM

> whitespace, as long as there's a comma too. It's almost like [expr
> min()] expects a single string argument, but that's not how it's
> documented, at least in 8.5.13.
 
Likely because ...more
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to [hidden email].